NEPCON China 2025 New Products Debut - Shaping the Future of Electronics Manufacturing

NEPCON China 2025 will be held at the Shanghai World Expo Exhibition & Convention Center from April 22-24, 2025. Over 100 new products will make their debut, including new technologies and products for key electronic manufacturing processes such as surface mounting, testing and measurement, soldering, dispensing, spraying, automation, supporting equipment and materials, and electrostatic protection. Please check out this issue's recommendations.

Booth No: 1B23

AX1-TD Online 3DX-ray Inspection Equipment

East China Premier

Product Highlights

The AXI-TD is independently developed by AXTEK Photoelectric, combining proprietary X-ray 3D reconstruction technology, image auto-analysis algorithms, and online automation technology from hardware to software. The equipment obtains 3D data of the inspected targets at high speed, enabling fast and accurate detection of product defects. It is suitable for 3D inspection in the SMT, DIP, semiconductor, and PCB fields.

Booth No: 1A02

Cleaning Agents, Flux, PCB Cleaning Solution, Adhesives

China Premiere

Product Highlights

Used for soldering electronic circuit boards, cleaning electronic products, and LED lamp packaging cleaning. The products have a wide range of applications.

Booth No: 1H03

Wind Speed Vibration Monitoring Solutions

Global Premiere

Product Highlights

✔ Real-time feedback of fan speed (RPM) to prevent slow heat transfer or turbulence.

✔ Early detection of abnormal hot air motors and fans in old or aging ovens, enabling timely fault elimination.

✔ One sensor monitors one fan, with up to 40 fans monitored per system.

✔ High-sensitivity sensors for easy monitoring.

✔ Timely identification and resolution of component displacements or missing parts caused by intermittent vibrations.

✔ Accurate 3-axis vibration measurement: X, Y, Z axes measure left-right, up-down, and front-back vibrations, respectively.

✔ System customizable with upper and lower limits, automatic alarms and notifications when out of range.

✔ Seamlessly integrates with KIC systems, with an intuitive and easy-to-use user interface.

✔ Real-time data analysis with traceability.

Booth No: 1F32

Soldering Station, Soldering Feeder

China Premiere

Product Highlights

✔ Universal design, achieving thermal balance through the energy generated by the heater and the heat stored in the soldering iron tip.

✔ Easy-to-remove soldering tips, adaptable to various shapes, and compatible with a spring clip system for all tasks.

✔ Use of independent soldering tips reduces stress and increases soldering speed (approximately 40 seconds to reach 350°C).

✔ Easily find the right soldering tip for the job, with three main soldering tip series and infinite shape transformations.

✔ Ergonomically designed handles for various work environments.

Booth No: 1J50

TR7500QE Plus Automated Optical Inspection Machine

China Premiere

Product Highlights

The TR7500QE Plus is equipped with innovative AI-driven algorithms and enhanced mechanical features for high-precision inspection. The side-view camera enables detection of inner-layer bridging, hidden lifted leads, and other covered defects. It also supports new smart factory standards like IPC-CFX and Hermes (IPC-HERMES-9852).

Booth No: 1G13

Intelligent Automatic Optical Inspection Machine PB500SD

East China Premiere

Product Highlights

The Yu Ke Ce white light interferometer AM-7000 series offers sub-nanometer level precision, driven by a high-accuracy piezoelectric ceramic unit. It features a scan speed of up to 400 µm/s and is applicable in semiconductor, precision machining, optics, aerospace, 3C products, materials, LCD, and other fields for precise measurement of surface roughness, cleanliness, profile, micro 3D morphology, steps, height, form, PV value, curvature, flatness, blind holes, etc.

Booth No: 1C34

OPTEEQ SG400 Series Programmer

Global Premiere

Product Highlights

Equipped with a newly designed programming engine for "extreme speed," "ultra-high stability," and "flexible applications."

Parameters:

Size: 1618630mm

Weight: 320g

Channels: 4 independent channels, allowing simultaneous programming of 32 target chips

Storage: Up to 256G

✔ Four independent channels allow different content or chips to be programmed simultaneously.

✔ Supports 10/100/1000M Ethernet connection.

✔ Compact design, easy to integrate into fixtures.

✔ Supports large capacity chips like eMMC and NAND.

✔ Provides rich dynamic libraries for external expansion and secondary development.

✔ Supports file encryption and license management.

✔ Real-time display of logs and historical log storage.

✔ Flexible, modular functionality.

Booth No: 1G08

Online 3D AXI

China Premiere

Product Highlights

The EFPscan 2150 series by Sanying Precision is designed for the SMT, semiconductor, and other electronics industries. It uses 3D CT imaging technology to perform high-speed, automated, online inspection of invisible solder joints/layers.

Join us at NEPCON China 2025 April 22-24, 2025, for an unparalleled opportunity to expand your network, engage in direct business matchmaking, and access innovative technologies that will shape the future of electronics manufacturing!

Pre-register for NEPCON China 2025: https://ali2.infosalons.com.cn/reg/NEPCON25SH/registeren/login?type=WE9ZIC

If interested in exhibiting at NEPCON China, please contact

Ms. Julia Gu

Tel: +86 21-2231-7010

Email: [email protected]

If interested in visiting NEPCON China, please contact

Mr. Walden Li

Email: [email protected], [email protected]

Mobile/WhatsApp/WeChat: +86 136-5125-1335

For TAP service, please contact:

Mr. Alan Li

Email: [email protected]